1. The
ilgak should be manufactured by a formal professional factory in accordance with the technical conditions and safety specifications of the ilgak, and the product should have the quality certificate of the manufacturer, otherwise it is not allowed to be used.
2. The new ilgak should be subjected to a load test, and the opening of the measuring ilgak should not exceed 0.25% of the original opening.
3.During use, check whether the ilgak is cracked or severely deformed, corroded and worn.
4. The
ilgakyiliga bir marta tekshirilishi kerak. Sinov paytida, ruxsat etilgan ish yukining 1,25 barobariga 10 minut statik sinov o'tkazing va kattalashtirish oynasi yoki boshqa usullar bilan tekshiring. Yoriqlar, yoriqlar va qoldiq deformatsiyalar bo'lmasligi kerak.
5. Uchta xavfli qismni kerosin bilan tozalash kerak. Yoriqlar bor yoki yo'qligini bilish uchun kattalashtiruvchi oynadan foydalaning. Plitalar uchun
ilgaks, burmalar va pimlarning eskirganligini tekshiring.
6. Defects on the ilgak shall not be repaired.